Recherche

Résultats de recherche

City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
EPCOR 2021-07-29 This map is a representation of each depth layers in the Surface Surcharge map from the 2014 Flood Mitigation Study. This spatial data was created as a result of a 2016 study, using 2014 data, done for the Edmonton area to determine the vulnerable drainage and sewage areas of Edmonton in regards to a 1 in 100 year rainfall event. Due to the constant changing of subsurface infrastructure (adding, upgrading, etc.) combined with the constant changing definition of a 1 in 100 year rainfall event (based on historic rainfall amounts), this raster file reflects the results of a study done in 2016 and should neither suggest previous year’s vulnerabilities nor future year’s vulnerabilities. For a more regional Edmonton area breakdown of the Study’s results: https://www.edmonton.ca/city_government/documents/RoadsTraffic/City-wide_Flood_Mitigation_Study.pdf There are three different colour to the vulnerability of the roadways and the corresponding ponding depth that would occur for that area during a large rainstorm. Those colours are: Green (representing the depth from surface that sanitary flows can surcharge from less than 2.5 m) Yellow (representing the depth from surface that sanitary flows can surcharge from 1.5 to 2.5 m) Red (representing the depth from surface that sanitary flows can surcharge from greater than 1.5 m) This Raster file is best viewed overlaid with the 2016 Flood Mitigation Study - Drainage and Sanitation Surcharge Map; as the various coloured areas follow the subsurface infrastructure (and the corresponding roadways if you are also viewing the street map as a layer). Disclaimer: No Warranty with Flood Risk Maps. Your use of the flood risk maps is solely at your own risk, and you are fully responsible for any consequences arising from your use of the flood risk maps. The flood risk maps are provided on an “as is” and “as available” basis, and you agree to use them solely at your own risk. There are no warranties, expressed or implied in respect to the flood risk maps or your use of them, including without limitation, implied warranties and conditions of merchantability and fitness for any particular purpose. Please note that the flood risk maps have been modified from their original source, and that all data visualization on maps are approximate and include only records that can be mapped. This dataset is based on 2014 information and will not be updated further. The model is based on a theoretical, worst-case scenario storm that has never occurred in the Edmonton area. Model Accuracy: The LiDar used was a 5 meter grid system. LiDar has an accuracy of ? cm horizontally/vertically. Bare Earth LiDar was used in for this model surface. This is a spline fit interpolations model. This is a 1D-1D model with 2D interpolations.The accuracy of the information provided in these data sets is plus or minus 10 cm vertically, and 10 cm horizontally. The 100 year flood was based on the 2015 Edmonton 4 year Chicago storm event over 20 plus neighbourhoods. The data is a collection of the worst case scenario of model runs. This is a common practice for Edmonton drainage models. These models are high level concept and projects determined from this data set will undergo finer, more detailed modeling. These maps are a visual representation and intended to be used when prioritization of the best engineering solutions that are scheduled to be brought forward to Utility Council to mitigate future flooding in the City. The best engineering solutions are high level concept designs and require further modeling and design. At the time of the PDF release, November 9, 2016 there was no funding for any projects to be completed or for further design. Strategy will be brought forward to Utility Committee on June 7, 2017. Council will be determining funding and rate of project completion. The Storm size used in these models are larger than Edmonton has historically seen. Historically, as seen in 2004 and 2012, only 4 neighbourhoods at a time were hit with the 100 year rainstorm event. With the continuation of the City-Wide Flood Mitigation Strategy these maps will become obsolete with smaller storms being applied to the area. Disclaimer: No Warranty with Flood Risk Maps. Your use of the flood risk maps is solely at your own risk, and you are fully responsible for any consequences arising from your use of the flood risk maps. The flood risk maps are provided on an “as is” and “as available” basis, and you agree to use them solely at your own risk. There are no warranties, expressed or implied in respect to the flood risk maps or your use of them, including without limitation, implied warranties and conditions of merchantability and fitness for any particular purpose. Please note that the flood risk maps have been modified from their original source, and that all data visualization on maps are approximate and include only records that can be mapped. Geo Coordinate System: WGS84
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
EPCOR 2017-04-05 This map is a representation of each depth layers in the Surface Ponding map from the 2014 Flood Mitigation Study. This map representation was created as a result of a 2013 to 2016 study done for the Edmonton area to determine the vulnerable areas of Edmonton in regards to a 1 in 100 year rainfall event. Due to the constant changing of subsurface infrastructure (adding, upgrading, etc.) combined with the constant changing definition of a 1 in 100 year rainfall event (based on historic rainfall amounts), this raster file reflects the results of a study done in 2016 and should neither suggest previous year’s vulnerabilities nor future year’s vulnerabilities. There are four different colours to show the depth of water that might pool on the ground during a large rainstorm. Those colours are: Green (representing a ponding depth from 0.00 - 0.35 m) Yellow (representing a ponding depth from 0.35 - 0.50 m) Orange (representing a ponding depth from 0.50 to 0.75 m) Red (representing a ponding depth greater than 0.75 m) For a more information regarding the Flood Risk Maps and the City’s proactive strategy see : https://www.edmonton.ca/city_government/documents/RoadsTraffic/City-wide_Flood_Mitigation_Study.pdf This dataset is based on 2014 information and will not be updated further. The model is based on a theoretical, worst-case scenario storm that has never occurred in the Edmonton area. Model Accuracy: For Areas west and central Digital Elevation Model was used from 2004. For the rest of the areas Bare Earth LiDar data was used. The surface data used was set to a horizontal resolution of 2.5 meters with a grid cell of 5m by 5m. This puts the vertical resolution at an accuracy of 0.1 meters. This is a spline fit interpolations model. This is a 1D-1D model with 2D interpolations.The accuracy of the information provided in these data sets is plus or minus 10 cm vertically, and 10 cm horizontally. The 100 year flood was based on the 2015 Edmonton 4 year Chicago storm event over 20 plus neighbourhoods. The data is a collection of the worst case scenario of model runs. This is a common practice for Edmonton drainage models. These models are high level concept and projects determined from this data set will undergo finer, more detailed modeling. Disclaimer: No Warranty with Flood Risk Maps. Your use of the flood risk maps is solely at your own risk, and you are fully responsible for any consequences arising from your use of the flood risk maps. The flood risk maps are provided on an “as is” and “as available” basis, and you agree to use them solely at your own risk. There are no warranties, expressed or implied in respect to the flood risk maps or your use of them, including without limitation, implied warranties and conditions of merchantability and fitness for any particular purpose. Please note that the flood risk maps have been modified from their original source, and that all data visualization on maps are approximate and include only records that can be mapped. Geo Coordinate System: WGS84
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
EPCOR 2021-02-16 The location of manholes in the City of Edmonton. A manhole is a vertical structure connecting the ground level to an underground sewer.
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
EPCOR 2023-07-13 A listing of EPCOR Utilities Inc. owned/operated hydrants in Edmonton.
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
EPCOR 2017-05-12 The location and boundaries of Storm Water Lakes in the City of Edmonton. The City of Edmonton provides this information based on the records retained by the City of Edmonton with respect to the matters. The City of Edmonton provides no warranty or representation as to whether the information is correct, accurate or free from error and whether it is otherwise suitable for your use or purpose.
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
EPCOR 2023-09-20 This dataset provides the average water network capacity (2023) within 200m x 200m hexagons, in Litres/second, for the City of Edmonton. The following colours describe the capacity of the city block area water system under computer-simulated conditions using EPCOR-owned hydrants: Red: 0-50 L/s Yellow: 50-100 L/s Light Green: 100-150 L/s Dark Green: 150-200 L/s Teal: 200-250 L/s Blue: 250-300 L/s Purple: 300 L/s and up No Data: No EPCOR-owned hydrants in Area Important Considerations: * EPCOR provides this data for information purposes only. EPCOR makes no guarantee, representation or warranty, express or implied, including that the data is true, accurate, complete, fit for a specific purpose or non-infringing, and no responsibility of any kind is accepted by EPCOR or EPCOR representatives for the completeness or accuracy of the data. EPCOR and its affiliates and their respective officers, directors, employees and other representatives shall not be liable to any person or entity as a result of the use or other handling of the data. * The hexagon grid utilized to present the average water network capacity data has been updated by EPCOR. As such, this version of the dataset should not be directly compared to previous versions of this dataset. * The average water network capacity is intended to be understood in a relative manner: e.g. a blue area is anticipated to provide higher flows on average than a green area. * Any city block area that indicates 0-50 L/s water network capacity has been evaluated by Edmonton Fire Rescue Services (EFRS). EFRS does not associate any significant risk with these areas and can adapt a response to a fire event in these areas given the small geographical area and buildings affected. * The results presented in this data were determined using computer modelling software that represented the distribution and transmission water network current in EWS's digital records as of February 16, 2023. Modifications to the water system after this date may change the water network capacity at any given time or place. * The results presented in this data represent the overall average water network capacity in an area during computer-simulated conditions at EPCOR-owned hydrants. Other factors may change the water network capacity at any given time or place. *The results presented in this data are not representative of lot-level available fire flow as outlined in the Volume 4 Design and Construction Standards. * The average water network capacity ranges are only indicative of average system capacity and not indicative of EPCOR-owned hydrant spacing. A development may still require infrastructure upgrades to meet minimum hydrant spacing requirements. * This map is not a substitute for directed engineering inquiries regarding infrastructure improvements to support development. Please contact EPCOR Water at wtrdc@epcor.com to determine fire protection requirements for development.
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
EPCOR 2019-09-26 A listing of fire hydrants throughout the Edmonton area.
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
EPCOR 2018-02-14 This story provides an explanation for the public about water consumption in 2016. The story included information about the average (annual, winter, summer) residential metered water consumption (2016) within 400 m x 400m hexagons (approximately two city blocks) provided in m3/month for the City of Edmonton. Average monthly residential winter water consumption is the average consumption of the following months: January, February, March, April, October, November and December. Average monthly residential summer water consumption is the average consumption of the following months: May, June, July, August and September. Only those hexagons that contain at least ten accounts are illustrated to ensure customer privacy. Residential consumption refers to water used primarily for domestic purposes, where no more than four separate dwelling units are metered by a single water meter.
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
EPCOR 2017-05-26 This story is based on the results of a 2016 study, using 2014 data, done for the Edmonton area to determine the vulnerable drainage and sewage areas of Edmonton in regards to a 1 in 100 year rainfall event. Due to the constant changing of subsurface infrastructure (adding, upgrading, etc.) combined with the constant changing definition of a 1 in 100 year rainfall event (based on historic rainfall amounts), this raster file reflects the results of a study done in 2016 and should neither suggest previous year’s vulnerabilities nor future year’s vulnerabilities. For a more regional Edmonton area breakdown of the Study’s results: https://www.edmonton.ca/city_government/documents/RoadsTraffic/City-wide_Flood_Mitigation_Study.pdf There are three different colour to the vulnerability of the roadways and the corresponding ponding depth that would occur for that area during a large rainstorm. Those colours are: Green (representing the depth from surface that sanitary flows can surcharge from less than 2.5 m) Yellow (representing the depth from surface that sanitary flows can surcharge from 1.5 to 2.5 m) Red (representing the depth from surface that sanitary flows can surcharge from greater than 1.5 m) This Raster file is best viewed overlaid with the 2016 Flood Mitigation Study - Drainage and Sanitation Surcharge Map; as the various coloured areas follow the subsurface infrastructure (and the corresponding roadways if you are also viewing the street map as a layer). Disclaimer: No Warranty with Flood Risk Maps. Your use of the flood risk maps is solely at your own risk, and you are fully responsible for any consequences arising from your use of the flood risk maps. The flood risk maps are provided on an “as is” and “as available” basis, and you agree to use them solely at your own risk. There are no warranties, expressed or implied in respect to the flood risk maps or your use of them, including without limitation, implied warranties and conditions of merchantability and fitness for any particular purpose. Please note that the flood risk maps have been modified from their original source, and that all data visualization on maps are approximate and include only records that can be mapped. This dataset is based on 2014 information and will not be updated further. The model is based on a theoretical, worst-case scenario storm that has never occurred in the Edmonton area. Model Accuracy: The LiDar used was a 5 meter grid system. LiDar has an accuracy of ? cm horizontally/vertically. Bare Earth LiDar was used in for this model surface. This is a spline fit interpolations model. This is a 1D-1D model with 2D interpolations.The accuracy of the information provided in these data sets is plus or minus 10 cm vertically, and 10 cm horizontally. The 100 year flood was based on the 2015 Edmonton 4 year Chicago storm event over 20 plus neighbourhoods. The data is a collection of the worst case scenario of model runs. This is a common practice for Edmonton drainage models. These models are high level concept and projects determined from this data set will undergo finer, more detailed modeling. These maps are a visual representation and intended to be used when prioritization of the best engineering solutions that are scheduled to be brought forward to Utility Council to mitigate future flooding in the City. The best engineering solutions are high level concept designs and require further modeling and design. At the time of the PDF release, November 9, 2016 there was no funding for any projects to be completed or for further design. Strategy will be brought forward to Utility Committee on June 7, 2017. Council will be determining funding and rate of project completion. The Storm size used in these models are larger than Edmonton has historically seen. Historically, as seen in 2004 and 2012, only 4 neighbourhoods at a time were hit with the 100 year rainstorm event. With the continuation of the City-Wide Flood Mitigation Strategy these maps will become obsolete with smaller storms being applied to the area. Disclaimer: No Warranty with Flood Risk Maps. Your use of the flood risk maps is solely at your own risk, and you are fully responsible for any consequences arising from your use of the flood risk maps. The flood risk maps are provided on an “as is” and “as available” basis, and you agree to use them solely at your own risk. There are no warranties, expressed or implied in respect to the flood risk maps or your use of them, including without limitation, implied warranties and conditions of merchantability and fitness for any particular purpose. Please note that the flood risk maps have been modified from their original source, and that all data visualization on maps are approximate and include only records that can be mapped.
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
EPCOR 2016-02-12 This dataset provides rainfall data during the 2013 to 2015 calendar years. Rainfall is measured between May and October; snowfall is not measured.

Instructions pour la recherche cartographique

1.Activez le filtre cartographique en cliquant sur le bouton « Limiter à la zone sur la carte ».
2.Déplacez la carte pour afficher la zone qui vous intéresse. Maintenez la touche Maj enfoncée et cliquez pour encadrer une zone spécifique à agrandir sur la carte. Les résultats de la recherche changeront à mesure que vous déplacerez la carte.
3.Pour voir les détails d’un emplacement, vous pouvez cliquer soit sur un élément dans les résultats de recherche, soit sur l’épingle d’un emplacement sur la carte et sur le lien associé au titre.
Remarque : Les groupes servent à donner un aperçu visuel de l’emplacement des données. Puisqu’un maximum de 50 emplacements peut s’afficher sur la carte, il est possible que vous n’obteniez pas un portrait exact du nombre total de résultats de recherche.