Recherche

Zenodo Translation missing: fr.blacklight.search.logo
Raw Data for: Fast rate dual-comb spectrometer in the water-transparent 7.5-11.5 μm region
Zenodo
Moretti, Luca; Walsh, Mathieu; Abualsaud, Nawaf; Gatti, Davide; Lamperti, Marco; Genest, Jérôme; Farooq, Aamir; Marangoni, Marco — 2024-02-27 This repository shares the data acquired and used to produce the figures in the paper "Fast rate dual-comb spectrometer in the water-transparent 7.5-11.5 μm region" published in Optics Letters (DOI: https://doi.org/10.1364/OL.515199) The "Figure_Data" zip file contains a ".txt" file for each Figure present in the Main Paper and Supplemental Document. The raw data acquired by the FT spectrometer and uploaded here for Figure 2 are afterward smoothed and normalized properly in the Main Paper to better show the spectra. Data shown in Figure 3 are calculated from the corresponding raw data.  Data used for Figure 4 are calculated from the corresponding raw blank DCS data. Data for Figure 5, 6 and S1 are retrieved from the corresponding raw Gas DCS data upon Cepstral removal of the spectral baseline and spectral fit exploiting the Hitran Database. The "Raw_Data" zip file contains the postprocessed Data of the DCS measurements and the RIN data as acquired. The Raw data of the DCS measurements as acquired are too large to be uploaded here, but may be obtained from the authors upon request."NH3_1o6kHz_IGMmean", "N2O_5o1kHz_IGMmean", "N2O_26kHz_IGMmean" contain the DCS interferogram averaged over 15s of acquisition for Gas measurements, performed with different DeltaFrep as described in the main text of the paper."Blank_1o6kHz_IGMs", "Blank_5o1kHz_IGMs", "Blank_26kHz_IGMs" contain all the phase corrected DCS interferograms acquired over 100ms, used to calculate the average SNR shown in Figure 4."RIN_DFG" contain the raw data acquired from the detector for RIN calculations, with an average voltage values of 25mV. The scripts for processing the Raw Data and retrieve the data as shown in the paper are home made. https://creativecommons.org/licenses/by/4.0/legalcode

Instructions pour la recherche cartographique

1.Activez le filtre cartographique en cliquant sur le bouton « Limiter à la zone sur la carte ».
2.Déplacez la carte pour afficher la zone qui vous intéresse. Maintenez la touche Maj enfoncée et cliquez pour encadrer une zone spécifique à agrandir sur la carte. Les résultats de la recherche changeront à mesure que vous déplacerez la carte.
3.Pour voir les détails d’un emplacement, vous pouvez cliquer soit sur un élément dans les résultats de recherche, soit sur l’épingle d’un emplacement sur la carte et sur le lien associé au titre.
Remarque : Les groupes servent à donner un aperçu visuel de l’emplacement des données. Puisqu’un maximum de 50 emplacements peut s’afficher sur la carte, il est possible que vous n’obteniez pas un portrait exact du nombre total de résultats de recherche.

(auteur : Walsh, Mathieu)

Limiter par :

Effacer tout

au