Recherche

Résultats de recherche

City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
2022-04-05 This inventory is a snapshot in time of vacant industrial land in Edmonton using data collected from January to December of each referenced year. This is a dataset using centroid points to geolocate vacant industrial land parcels in the city. The data was generated by extracting vacant industrial land data from the City of Edmonton’s Tax Assessment Control System and provides a summary of vacant industrial land in Edmonton’s industrial areas. Explanations of zoning and land use classifications applicable in the industrial areas are given at the following site: http://webdocs.edmonton.ca/InfraPlan/zoningbylaw/bylaw_12800.htm. A vacant lot is classified as a registered lot (serviced or unserviced) that contains no permanent or temporary structures or developments at the time of inspection. The City of Edmonton provides this information in good faith. While every effort has been made to ensure the accuracy of information contained in this report, the City of Edmonton provides no warranty, express or implied, regarding the accuracy, completeness or correctness of information contained herein. The City of Edmonton disclaims any liability for the use of this information. No part of this material may be reproduced, in whole or in part, without acknowledgement.
Dryad Translation missing: fr.blacklight.search.logo
2012-12-12 Hybridization can lead to phenotypic differences arising from changes in gene expression patterns or new allele combinations. Variation in gene expression is thought to be controlled by differences in transcription regulation of parental alleles, either through cis or trans regulatory elements. A previous study among brook charr hybrids from different populations (Rupert, Laval, and domestic) showing distinct length at age during early life stages also revealed different patterns in transcription regulation inheritance of transcript abundance. In the present study, transcript abundance by means of RNA-seq and qRT-PCR, SNP genotypes and allelic imbalance were assessed in order to understand the molecular mechanisms underlying the observed transcriptomic and differences in length at age among domestic × Rupert hybrids and Laval × domestic hybrids. We found 198 differentially expressed genes between the two hybrid crosses and allelic imbalance could be analyzed for 69 of them. Among these 69 genes, 36 genes exhibited cis acting regulatory effects in both of the two crosses, thus confirming the prevalent role of cis acting regulatory elements in the regulation of differentially expressed genes among intraspecific hybrids. In addition, we detected a significant association between SNP genotypes of three genes and length at age. Our study is thus one of the few that have highlighted some of the molecular mechanisms potentially involved in the differential phenotypic expression in intraspecific hybrids for non-model species. https://creativecommons.org/publicdomain/zero/1.0/
City of Calgary Open Data Portal Translation missing: fr.blacklight.search.logo
2016-10-29 Census data is an official count of dwelling units and population within those units. The data is physically collected and may be supplemented with other information such as the periodic age/gender distribution data. This additional data allows for better interpretation of the population statistics. A community district is a fixed boundary within Calgary, created by and for the Corporation. It represents a distinct geographical area of the city that is determined through the Land Development/Subdivision Process and approved by Council. https://data.calgary.ca/d/Open-Data-Terms/u45n-7awa
City of Calgary Open Data Portal Translation missing: fr.blacklight.search.logo
2016-10-29 Census data is an official count of dwelling units and population within those units. The data is physically collected and may be supplemented with other information such as the periodic age/gender distribution data. This additional data allows for better interpretation of the population statistics. A community district is a fixed boundary within Calgary, created by and for the Corporation. It represents a distinct geographical area of the city that is determined through the Land Development/Subdivision Process and approved by Council. https://data.calgary.ca/d/Open-Data-Terms/u45n-7awa
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
2019-06-26 This was one single topic among a couple from the February 2019 Mixed Topic survey. To view the survey questions, click on the following link: https://www.edmontoninsightcommunity.ca/c/a/5Zm2RDGSw7B7iGL4Hao69s?t=1 Open from February 12 - 19, 2019. At the time the survey was launched survey invitations were sent to 9,952 Insight Community Members. 2,502 members completed the survey which represents a completion rate of 25%. A total of 2,523 respondents completed the survey: 2,502 Insight Community Members and 11 from the call to action button on our webpage and 10 using the anonymous link(s) on edmonton.ca/surveys which will have no demographic information. Column definitions can be found as an attachment to this dataset (under the About option, in the Attachment section).
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
2019-01-24 Driver Feedback Sign DFS158 Latitude: 53.612176 Longitude: -113.383867 The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal). Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset. Details of how the data is collected by the DFS are as follows: - Data is accumulated and reported in 15 minute intervals - Vehicle speeds are captured/reported in speed intervals (bins) - Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting) - Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts) - The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN. Things to note: DFS devices are not to be used as or confused with traffic counters, as they are not. DFS devices have a minimum detectable speed of approximately 6 km/hr. DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr. DFS devices are programmable with different parameters that can also follow a timed schedule.
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
2018-12-14 Driver Feedback Sign DFS174 Latitude: 53.45934 Longitude: -113.39763 The City has a number of Driver Feedback Signs (DFS) installed around the city. These units collect data as traffic approaches them and in some cases may display a message or a speed that is being detected. Also, these units are radar based and can only track one vehicle at a time (strongest signal). Due to the number of DFS installations combined with the volume of data collected, each DFS has its own dataset. Details of how the data is collected by the DFS are as follows: - Data is accumulated and reported in 15 minute intervals - Vehicle speeds are captured/reported in speed intervals (bins) - Speed range/interval for the bins are determined by parameters/settings set for the DFS (Minimum/Maximum Speed Detection Setting) - Two speed values are recorded for every vehicle - a Highest Speed Detected and a Slowest Speed Detected (explaining why there are two vehicle counts) - The bins go from Bin 1 to Bin 10. Bin 1 can also be referred to a LO BIN and Bin 10 can also be referred to as HIGH BIN. Things to note: DFS devices are not to be used as or confused with traffic counters, as they are not. DFS devices have a minimum detectable speed of approximately 6 km/hr. DFS devices have a maximum (theoretical) detectable speed of approximately 225 km/hr. DFS devices are programmable with different parameters that can also follow a timed schedule.
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
2016-11-02 This was one single topic among many as part of the March 2016 Mixed Topic survey. To view the survey questions, click on the following link: https://www.edmontoninsightcommunity.ca/R.aspx?a=898&as=vJ13e5gK1H&t=1 Open from March 07 - 15, 2016. At the time the survey was launched survey invitations were sent to 4847 Insight Community Members. 1885 members completed the survey which represents a completion rate of 39%. A total of 1893 respondents completed the survey: 1885 Insight Community Members and 8 using the anonymous link which will have no demographic info. Column definitions can be found as an attached document, found under the "About" option, in the "Attachments" section.
City of Edmonton Open Data Portal Translation missing: fr.blacklight.search.logo
2017-03-29 This was one single topic among many from Part 2 of the March 2017 Mixed Topic survey. To view the survey questions, click on the following link: https://www.edmontoninsightcommunity.ca/R.aspx?a=1623&as=9jF1MQ27Rm&t=1 Open from March 21 - 28, 2017. At the time the survey was launched survey invitations were sent to 6705 Insight Community Members. 1748 members completed the survey which represents a completion rate of 26%. A total of 1758 respondents completed the survey: 1748 Insight Community Members and 10 using the anonymous link(s) which will have no demographic info. Column definitions can be found as an attachment to this dataset (under the About option, in the Attachment section).
Dryad Translation missing: fr.blacklight.search.logo
2015-07-07 Traditional niche theory predicts that when species compete for one limiting resource in simple ecological settings the more fit competitor should exclude the less fit competitor. Since the advent of neutral theory ecologists have increasingly become interested both in how the magnitude of fitness inequality between competitors and stochasticity may affect this prediction. We used numerical simulations to investigate the outcome of two-species resource competition along gradients of fitness inequality (inequality in R*) and initial population size in the presence of demographic stochasticity. We found that the deterministic prediction of more fit competitors excluding less fit competitors was often unobserved when fitness inequalities were low or stochasticity was strong, and unexpected outcomes such as dominance by the less fit competitor, long-term co-persistence of both competitors or the extinction of both competitors could be common. By examining the interaction between fitness inequality and stochasticity our results mark the range of parameter space in which the predictions of niche theory break down most severely, and suggest that questions about whether competitive dynamics are driven by neutral or niche processes may be locally contingent. https://creativecommons.org/publicdomain/zero/1.0/
Dryad Translation missing: fr.blacklight.search.logo
2011-08-11 At the population level, recombination mediates the efficiency with which selection can eliminate deleterious mutations. At the individual level, deleterious alleles may influence recombination, which would change the rate at which linkage disequilibrium is eroded and thereby alter the efficiency with which deleterious alleles are purged. Here we test whether the presence of a deleterious allele on one autosome affects recombination on another autosome. We find that deleterious alleles not only alter the rate but also the pattern of recombination. However, there is little support that different deleterious alleles affect recombination in a consistent manner. Because we have detailed information on individual females across their life times, we are able to examine how recombination patterns change with age and find that these patterns are also affected by the presence of deleterious alleles. The differences among genotypes or among age classes is large enough to add substantial noise to genetic mapping experiments that do not consider these sources of variation. https://creativecommons.org/publicdomain/zero/1.0/
Open Data Canada Translation missing: fr.blacklight.search.logo
Canada Revenue Agency | Agence du revenu du Canada
2020-11-23 The public perception index (PPI) is the combined rating from four questions from the Agency’s Annual Corporate Research (ACR), a public opinion research study that touches on service and Agency reputation and values indicators. The four questions that blend into the index are: How would you rate the overall performance of the Canada Revenue Agency; How would you rate the ease of understanding with respect to the information provided to taxpayers through tax forms and resources; How satisfied are you with the overall quality of the service you received when you contacted the Canada Revenue Agency by telephone on this most recent occasion; Did you get what you needed from the Canada Revenue Agency on this particular occasion? These indicators are found in the “core” ACR and asked every iteration. They are key indicators for the Agency’s reputation, provision of information, service interaction, and service success. L’indice de la perception du public (IPP) correspond à la note combinée des quatre questions de la recherche d’entreprise annuelle (REA) de l’Agence, une étude de recherche sur l’opinion publique qui traite des indicateurs liés aux services, aux valeurs et à la réputation de l’Agence. Les quatre questions qui servent à former l’indice sont : Comment évalueriez-vous le rendement global de l’ARC?; Comment évalueriez-vous la facilité à comprendre les renseignements que l’ARC fournit aux contribuables au moyen de formulaires fiscaux et d’autres ressources?; Dans quelle mesure êtes-vous satisfait de la qualité globale du service que vous avez reçu lors de votre plus récente interaction par téléphone avec l’ARC?; Avez-vous obtenu de l’ARC ce dont vous aviez besoin à ce moment-là? Ces indicateurs se trouvent dans la recherche d’entreprise annuelle « de base », et les questions sont posées chaque fois qu’une recherche est menée. Il s’agit d’indicateurs clés pour évaluer la réputation de l’Agence, la communication de renseignements, l’interaction avec les services et les résultats des services. http://open.canada.ca/en/open-government-licence-canada
Open Data Canada Translation missing: fr.blacklight.search.logo
Natural Resources Canada | Ressources naturelles Canada
2015-07-13 This data provides the integrated cadastral framework for the specified Canada Land. The cadastral framework consists of active and superseded cadastral parcel, roads, easements, administrative areas, active lines, points and annotations. The cadastral lines form the boundaries of the parcels. COGO attributes are associated to the lines and depict the adjusted framework of the cadastral fabric. The cadastral annotations consist of lot numbers, block numbers, township numbers, etc. The cadastral framework is compiled from Canada Lands Survey Records (CLSR), Registration Plans (RS) and Location Sketches (LS) archived in the Canada Lands Survey Records. Ces données fournissent le cadastre intégré pour la Terre du Canada spécifiée. Le canevas cadastral contient les parcelles, les routes, servitudes, zone administratives, lignes cadastrales, annotations et les points. Les lignes cadastrales forment les limites des parcelles. Des attributs COGO sont rattachés à ces lignes et montrent le canevas ajusté du morcellement foncier. Les annotations comprennent les numéros de lot, les numéros de bloc, les numéros de township, etc. Le canevas cadastral est compilé à partir des archives d'arpentage des Terres du Canada (CLSR), des plans d'enregistrement (PE) et des croquis de localisation (CL) archivés dans les Archives d'arpentage des Terres du Canada. http://open.canada.ca/en/open-government-licence-canada
Open Data Canada Translation missing: fr.blacklight.search.logo
Natural Resources Canada | Ressources naturelles Canada
2002-01-01 An archive of 2D regional seismic and long period magnetotelluric data collected during 20 years of work under the LITHOPROBE project. Data are primarily onshore and cover widespread regions of Canada. Available data types include raw digital data, processed sections, and images of final sections, as well as auxiliary information required for analysis of the data. Archives de données sismiques régionales 2D et de données magnétotelluriques de longue période issues de travaux menés pendant 20 ans dans le cadre du projet LITHOPROBE. Les données couvrent de grandes régions du Canada, principalement dans les terres. Parmi les types de données disponibles mentionnons des données numériques brutes, des coupes traitées et des images de coupes finales ainsi que l’information accessoire nécessaire à l’analyse des données. http://open.canada.ca/en/open-government-licence-canada
Open Data Canada Translation missing: fr.blacklight.search.logo
Natural Resources Canada | Ressources naturelles Canada
1986-01-01 This airborne or shipborne geophysical survey recorded the following parameters: Total Field Magnetic. The flight line spacing is 4000 m. The survey was flown between 1985-01-01 and 1985-12-31. The data were Digitally acquired. Platform: Fixed-wing. Les données enregistrées durant ce levé géophysique aéroporté ou marin sont : Champ magnétique total. L'espacement des lignes est de 4000 m. Le levé a été effectué pendant la période allant de 1985-01-01 et 1985-12-31. Les données furent Enregistrées numériquement. Plat-forme : Avion. http://open.canada.ca/en/open-government-licence-canada
Open Data Canada Translation missing: fr.blacklight.search.logo
Natural Resources Canada | Ressources naturelles Canada
2015-06-30 This data provides the integrated cadastral framework for the specified Canada Land. The cadastral framework consists of active and superseded cadastral parcel, roads, easements, administrative areas, active lines, points and annotations. The cadastral lines form the boundaries of the parcels. COGO attributes are associated to the lines and depict the adjusted framework of the cadastral fabric. The cadastral annotations consist of lot numbers, block numbers, township numbers, etc. The cadastral framework is compiled from Canada Lands Survey Records (CLSR), Registration Plans (RS) and Location Sketches (LS) archived in the Canada Lands Survey Records. Ces données fournissent le cadastre intégré pour la Terre du Canada spécifiée. Le canevas cadastral contient les parcelles, les routes, servitudes, zone administratives, lignes cadastrales, annotations et les points. Les lignes cadastrales forment les limites des parcelles. Des attributs COGO sont rattachés à ces lignes et montrent le canevas ajusté du morcellement foncier. Les annotations comprennent les numéros de lot, les numéros de bloc, les numéros de township, etc. Le canevas cadastral est compilé à partir des archives d'arpentage des Terres du Canada (CLSR), des plans d'enregistrement (PE) et des croquis de localisation (CL) archivés dans les Archives d'arpentage des Terres du Canada. http://open.canada.ca/en/open-government-licence-canada
Open Data Canada Translation missing: fr.blacklight.search.logo
Natural Resources Canada | Ressources naturelles Canada
2001-07-01 An archive of 2D regional seismic and long period magnetotelluric data collected during 20 years of work under the LITHOPROBE project. Data are primarily onshore and cover widespread regions of Canada. Available data types include raw digital data, processed sections, and images of final sections, as well as auxiliary information required for analysis of the data. Archives de données sismiques régionales 2D et de données magnétotelluriques de longue période issues de travaux menés pendant 20 ans dans le cadre du projet LITHOPROBE. Les données couvrent de grandes régions du Canada, principalement dans les terres. Parmi les types de données disponibles mentionnons des données numériques brutes, des coupes traitées et des images de coupes finales ainsi que l’information accessoire nécessaire à l’analyse des données. http://open.canada.ca/en/open-government-licence-canada
Dryad Translation missing: fr.blacklight.search.logo
2019-01-18 1. In ectotherms, anthropogenic warming often increases energy requirements for metabolism, which can either impair growth (when resources are limiting) or lead to higher predator feeding rates and possibly stronger top-down trophic interactions. However, the relative importance of these effects in nature remains unclear because: 1) thermal adaptation or acclimation could lower metabolic costs; 2) greater prey production at warmer temperatures could compensate for higher predator feeding rates; and/or 3) temperature effects on trophic interactions via altered biological rates could be small relative to other, temperature-unrelated human impacts on food webs. 2. Here, we examined effects of deforestation-associated warming on the minnow Enteromius neumayeri, occurring in both forested (cool) and deforested (warm) streams located inside or nearby an afrotropical rainforest. Combining approaches from physiological and community ecology, we quantified impacts of anthropogenic warming on the metabolism, growth, and trophic interactions of this tropical ectotherm. We then compared these effects with impacts of land use unrelated to temperature. 3. In a long-term laboratory acclimation experiment quantifying the temperature-dependence of growth and metabolism in E. neumayeri, warming increased metabolic rates and decreased growth (at a limited ration). We found no evidence of local (thermal) adaptation, with warming affecting farm and forest populations similarly. 4. Then, using mark-recapture methods to quantify impacts of warming on performance in situ, we found similar growth rates in fish from deforested and forested streams despite their distinct thermal environments. This suggests higher prey consumption at deforested sites to compensate for greater metabolic costs, which could strengthen fish-invertebrate interactions. 5. Finally, we developed a bioenergetics model to estimate fish-invertebrate interaction strength and quantify temperature-related and unrelated impacts of land use on this interaction. We found that although warming increased fish consumption, it apparently increased invertebrate production even more and thus had a net weakening effect on estimated interaction strength. Most importantly, variation in both fish and invertebrate density not directly related to temperature had a much stronger influence on estimated interaction strength than temperature effects on predator consumption and prey growth. 6. We conclude that ectotherms can sometimes offset the metabolic costs of warming with a small increase in consumption that hardly effects food web interactions compared to non-metabolic impacts of anthropogenic disturbances. Future research should assess whether this is a common feature of heavily-impacted ecosystems facing multiple stressors. https://creativecommons.org/publicdomain/zero/1.0/
Open Data Canada Translation missing: fr.blacklight.search.logo
Natural Resources Canada | Ressources naturelles Canada
2001-07-01 An archive of 2D regional seismic and long period magnetotelluric data collected during 20 years of work under the LITHOPROBE project. Data are primarily onshore and cover widespread regions of Canada. Available data types include raw digital data, processed sections, and images of final sections, as well as auxiliary information required for analysis of the data. Archives de données sismiques régionales 2D et de données magnétotelluriques de longue période issues de travaux menés pendant 20 ans dans le cadre du projet LITHOPROBE. Les données couvrent de grandes régions du Canada, principalement dans les terres. Parmi les types de données disponibles mentionnons des données numériques brutes, des coupes traitées et des images de coupes finales ainsi que l’information accessoire nécessaire à l’analyse des données. http://open.canada.ca/en/open-government-licence-canada

Instructions pour la recherche cartographique

1.Activez le filtre cartographique en cliquant sur le bouton « Limiter à la zone sur la carte ».
2.Déplacez la carte pour afficher la zone qui vous intéresse. Maintenez la touche Maj enfoncée et cliquez pour encadrer une zone spécifique à agrandir sur la carte. Les résultats de la recherche changeront à mesure que vous déplacerez la carte.
3.Pour voir les détails d’un emplacement, vous pouvez cliquer soit sur un élément dans les résultats de recherche, soit sur l’épingle d’un emplacement sur la carte et sur le lien associé au titre.
Remarque : Les groupes servent à donner un aperçu visuel de l’emplacement des données. Puisqu’un maximum de 50 emplacements peut s’afficher sur la carte, il est possible que vous n’obteniez pas un portrait exact du nombre total de résultats de recherche.